If you want to spruce up your bathroom, consider painting the bathtub. There are many ways to go about painting the bathtub, including using epoxy paint. However, you need to be careful when you do it. The paint can get into the drain, so be sure to carefully tape off the openings. Once the paint is dry, remove the painter’s tape and wait 24 hours before using the tub.
You’ll need a water-proof paint for this project, since regular paint will chip off and cause your bathtub to deteriorate. Fortunately, there are kits available that include all of the necessary products and instructions. This way, you can paint the bathtub in a DIY manner without having to hire a professional.
You should first determine the type of paint you plan to use. The best paint for bathtubs is a two-part epoxy paint. You can buy spray cans of epoxy paint, which give a smoother finish. However, you should be aware that it is difficult to remove the leftover paint from the bathtub.
Before you paint, make sure to use the proper tools. A paint brush or roller will work best if you can get around the corners of the bathtub. When applying epoxy paint, you’ll need to work from top to bottom to avoid bumping the edges or making them too slippery. A tack cloth is also useful for removing paint specs and dirt. If you use a roller, make sure to stir the paint first before you apply it to the tub.
Regardless of the paint type, you should first clean your bathtub thoroughly. You should then use paper towels or painter’s tape to protect the surrounding surfaces. If you’re painting the bathtub from scratch, you should use enamel acrylic primer. You should also consider using spray paint, as it will give you a smooth and even coat in a shorter time.
The paint should be mixed two-part epoxy before use. Mix thoroughly for at least two minutes, and save half of the mixture for the second coat. Make sure to allow adequate drying time between each coat. Once the primer is dry, you can then apply the second coat of epoxy paint. Be sure to apply two thin coats, and allow adequate drying time between them.
If you are concerned about the cost of acrylic liners, you can opt for a tub liner. This will help you fix the problem without having to replace the entire tub. This method is faster and cheaper than the tub replacement, and it will restore the quality of the fixture. Apart from being inexpensive, tub liners also save you from the hassle of painting the tub.
Before you start painting, you should thoroughly clean the bathtub. If you are going to paint the bathtub from scratch, you can use a bleach solution to clean it. Then, you should let it sit for at least 10 minutes, and then rinse it off. You can also use an abrasive bathroom cleaner and scrubby pads to remove any stubborn debris.
